Electronic Weighing System for Lime Shaft Kiln
Limestone batching electronic weighing system (TTSC-1.5 type)
In the production process of the vertical lime kiln, limestone and coal are required to be mixed, and the ratio of the two materials is very important. In addition, when the particle size of the raw materials or the combustion value of the coal changes, it is necessary to adjust the ratio of the two raw materials, which can be realized by operating the microcomputer in the industrial control room.
Fuel batching electronic weighing system (TTMC-0.5 type)
The main pressure sensing elements and PLC modules in the electronic scale are imported devices, which can ensure continuous and long-term trouble-free operation.
Intelligent master controller (TTZL-10 type)
In the main winch system, the motor operation is changed to variable frequency speed regulation. In the whole trolley stroke, the 0-6m stroke from the feeding start adopts stepless acceleration, after 6m, it is adjusted to 1m/s to run smoothly, and the terminal stroke is advanced 6m for stepless deceleration until unloading.
This design scheme ensures the stable operation of the feeding truck, greatly reduces the vibration and the failure rate of the inclined bridge, and can improve the lifting capacity by 60% compared with the use of frequency conversion speed regulation.
The controller of the main hoist is now designed as an IC-A intelligent controller, which greatly reduces the maintenance of the hoist system, and the operating condition of the trolley and the adjustment of the wire rope length no longer need to be stopped and adjusted, and the practical life of the wire rope is increased by more than 3 times.
